11 replies to this topic

[chgolatin2]

Dont know and I'm curious if anyone has had problems injecting Omna's with a 25G pin? I guess the oil is too thick to safely pass through the pin, but the curious thing is that I've always used 25g for administration

[chgolatin2]

WTF~ No replies?????

[piotr]

Hey bro never tried to pass oil through a 25g, 23g has always been small enough for me... But I'd imagine oil would slowly pass through a 25g, given the ease with which it passes through a 23g, especially if you warm up the solution... You chucking the omnas into the microwave before you jack em up lol??

piotr

[chgolatin2]

Hey Piotr, never tried the microwave option since I dont want to damage the goods. How long do you put them in for? I usually try to run it throw some warm water. But again that hasnt worked very well

[deadweight]

i never have a problem with a 25g useing omans...its alittle slow injecting the oil but it not really a problem....yu can heat the oil up that will take the thickness away...dw

[piotr]

try nuking them for just a few seconds and see how you go... i don't believe the radiation will destroy the gear... there's no chemical reaction taking place its just bouncing the oil molecules around causing it to heat up...

piotr

[chgolatin2]

Cool, Thanks for the info! So about 10 Sec's on the Micro?

[deadweight]

Cool, Thanks for the info! So about 10 Sec's on the Micro?

i dont know about 10 secs...first fill the needle up then place it on top of a heate3d stove for a few secs....feel when its warm and then inject....you dont want it hot..just warm....that will make it inject faster.i did some this morining ..i mixed it with some tren and it took about 1 min to get 2ccs down which is long in my book...i had to really push to make it work...I didnt have the time to heat it up...dw

[Cowboytroy]

Damn 25s ive never used one that small. Iv found 22s to work the best for me, but that may be the reason i have so much scare tissue on my ass

[piotr]

go for trial and error... try 5 sec see if its warm enough... if not 10 sec... IE titrate upwards from just a couple seconds... like DW said tho you don't want it HOT - "warm" is enough to lower the viscosity of the oil quite a bit... Also I worry a little that if you get it too hot the increased pressure within the amp due to the expanding oil will be too great and it might crack... Just warm it up a bit mate

let us know how it works

piotr

[deadweight]

Damn 25s ive never used one that small. Iv found 22s to work the best for me, but that may be the reason i have so much scare tissue on my ass

you need to find more spots to stick bro...spred the injections around a bit ..that might slove your problem...dw

[piotr]

Damn 25s ive never used one that small. Iv found 22s to work the best for me, but that may be the reason i have so much scare tissue on my ass

you need to find more spots to stick bro...spred the injections around a bit ..that might slove your problem...dw

yeah bro you keep sticking same spot over and over it'll start to grissle up like DW said... i find i have no problem with recycling site once per week no less... more frequent than that scars me up I got a spot in my left leg that I fucked from two courses of ED tren + test prop courses cos I was lazy

piotr